How to make a herringbone friendship bracelet

How to make a herringbone friendship bracelet
How to make a herringbone friendship bracelet
Anonim

Herringbone friendship bracelets are very popular, especially as "friendship bracelets." Gifting your friends with herringbone friendship bracelets is a great way to show them that they mean you. You can also wear them yourself!

Steps

Method 1 of 2: Making a Brazilian herringbone bracelet

Make a Chevron Friendship Bracelet Step 1

Step 1. Prepare the embroidery thread

Cut embroidery thread or braided cotton thread to a length of about 152 to 165 cm for each color, depending on your wrist size. You will need at least 6 lengths of thread (2 of each color), but you can use as many threads as you want, as long as you take the same amount for each color.

  • The more threads you use, the more complex your color scheme will be and the wider your bracelet will be.
  • Use whatever colors you like, just make sure you have two threads of each color you want.
Make a Chevron Friendship Bracelet Step 2

Step 2. Tie off the wires

Tie the ends of the strings in a knot and tie them so that they hold tight when you finish the bracelet.

You can attach them to your clipboard, pin them to your pants or a pillow, or tape them to your desk. You can also use a clip that hangs from a filing cabinet or book. Alternatively, you can simply attach the end of your future bracelet to the handle of a drawer

Make a Chevron Friendship Bracelet Step 3

Step 3. Arrange the strands

Using the threads, make a pattern so that each side of the center line of your bracelet is a reflected image of each other, the two outermost threads should be the same color and so continuation to the center.

Imagine there is an imaginary line in the middle and create the same color pattern with the threads on both sides of the line

Step 4. Start the right knots

Starting with the rightmost thread, tie a knot twice in the adjacent thread (i.e. the second from the right).

  • To make a straight knot, make a 90 ° angle with the thread you are going to tie above the thread to which you tie the first. Then, make a loop with the thread that you tie under the other thread and pull to tighten it.
  • Note: Remember to tie two knots for each thread.
  • When you have finished tying the rightmost yarn to the adjacent yarn, do the same with the next yarn going towards the center. Continue this operation until you reach the middle.
  • Note: The thread you started to knot with (the one on the far right) should now be in the middle.

Step 5. Start the left knots

From the left side, tie knots in the leftmost yarn until you reach the middle.

To tie a knot on the left, do the same as for the knots on the right, but in the other direction. Make a 90 ° angle with the thread you are going to tie above the thread to which you tie the first, then make a loop with the thread that you tie below the other thread and pull to tighten

Step 6. Tie the middle knots

Tie a left or right knot (it doesn't matter) with the two wires in the middle to connect the two sides (be sure to tie two knots well each time).

Note: If you've done everything correctly so far, the threads you tied in the center should be the same color and you should start to see a "V" shaped pattern emerging

Step 7. Continue to make your design

Repeat steps 4, 5 and 6 until you have reached the desired length, always starting with the outermost threads on each side. These threads should always be the same color.

Make a Chevron Friendship Bracelet Step 8

Step 8. Finish your bracelet

Tie a knot at the end of the pattern and use the excess threads to tie the bracelet to your wrist or your friend's wrist.

Alternatively, you can create a closure with a button and a buckle for the bracelet. Tie a button at one end by passing two threads through the holes in the button. Then, tie the threads and cut off anything that protrudes (even the pieces of thread not used for the buttons). On the other end of the bracelet, you should already have a loop formed between the final knot and where the knots on your bracelet begin. Pass the button through this loop after you have completed all of the steps

Method 2 of 2: Make a double herringbone friendship bracelet

Make a Chevron Friendship Bracelet Step 9

Step 1. Prepare the embroidery thread

For this bracelet you will need threads of four different colors. Cut two pieces of yarn of each color about 165 cm each. You should end up with eight sons.

Once you have cut all the threads, fold the package of threads in half and cut in the center. You will then have a total of 16 threads

Make a Chevron Friendship Bracelet Step 10

Step 2. Tie off the wires

Tie a knot in one end of the wire and tie it to a flat work surface with sturdy tape (such as masking tape or chatterton).

Alternatively, you can tie the threads to your pants with a safety pin, tie it to a dresser drawer or a paperweight

Make a Chevron Friendship Bracelet Step 11

Step 3. Arrange the wires

With the threads, make a pattern so that each side of the center line of your bracelet is a mirror image of each other, but this should be repeated twice so that you get two exact replicas of the same pattern. mirror right next to each other.

  • For example, your pattern might look something like this: 1 2 3 4 4 3 2 1 1 2 3 4 4 3 2 1.
  • Imagine there is an imaginary line in the middle and create the same color pattern with the threads on both sides of the line. Then repeat this pattern again.

Step 4. Start the right knots

Starting with the rightmost thread, tie a knot twice in the adjacent thread (i.e. the second from the right).

  • To make a straight knot, make a 90 ° angle with the thread you are going to tie above the thread to which you tie the first. Then, make a loop with the thread that you tie under the other thread and pull to tighten it.
  • Note: Remember to tie two knots for each thread.
  • Once you have finished tying the rightmost yarn to the adjacent yarn, do the same with the next yarn going towards the center. Continue this operation until you reach the middle.
  • Note: The thread you started to knot with (the one on the far right) should now be in the middle.

Step 5. Start the left knots

From the left side, tie knots in the leftmost yarn until you reach the middle.

  • To tie a knot on the left, do the same as for the knots on the right, but in the other direction. Make a 90 ° angle with the thread you are going to tie above the thread to which you tie the first, then make a loop with the thread that you tie below the other thread and pull to tighten.
  • You should have completed the first side of the double mirror pattern.

Step 6. Make the other side

Repeat steps 4 and 5 for the left side of the double herringbone pattern.

Step 7. Tie the middle knots

Tie a left or right knot (it doesn't matter) with the two wires in the middle to connect the two sides. Make sure you tie two knots in the middle.

Note: If you've done everything correctly so far, the threads you tied in the center should be the same color and you should start to see a double "V" shaped pattern emerging

Step 8. Continue to make your design

Repeat steps 4, 5, and 6 until you have reached your desired length, always starting with the strands furthest in the middle and moving outward in both directions to complete the double mirrored pattern (1 2 3 4 4 3 2 1 1 2 3 4 4 3 2 1).

Step 9. Finish the bracelet

Tie a knot at the end of the pattern and use the excess threads to tie the bracelet to your wrist or your friend's wrist.

Alternatively, you can create a closure with a button and a buckle for the bracelet. Tie a button at one end by passing two threads through the holes in the button. Then, tie the threads and cut off anything that protrudes (even the pieces of thread not used for the buttons). On the other end of the bracelet, you should already have a loop formed between the final knot and where the knots on your bracelet begin. Pass the button through this loop after you have completed all of the steps

Advice

  • Make tight double knots to prevent your bracelet from coming undone.
  • You will find embroidery thread in any hobby store or haberdashery store.
  • If your bracelet starts to wrap around itself, iron it.
  • Make a friendship bracelet to give to your friends for Christmas.
  • Deploy the wires the same way each time.
  • Use different color combinations for every occasion. For example, take a combination of pink, red and white for Valentine's Day, or a combination of red and green for Christmas.

Popular by topic