How to integrate your SATA drivers into a Windows XP installation CD with nLite

How to integrate your SATA drivers into a Windows XP installation CD with nLite
How to integrate your SATA drivers into a Windows XP installation CD with nLite
Anonim

A common error encountered by Windows XP enthusiasts when trying to downgrade their new laptop from Vista to XP is a STOP error, also known as a BSOD (Blue Screen Of Death). This happens when the installer searches for an Advanced Technology Attachment (ATA) parallel interface but finds a serial ATA interface instead.

“Since 2009, SATA has replaced most of the parallel ATA interfaces in all consumer PCs. "

This means that, in most cases, if you choose to run Windows XP on your new laptop, you will need to incorporate the drivers for your SATA controller into your Windows XP installation CD, otherwise the installer will never see your hard drive. This integration process is called slipstreaming. This guide will show you step by step how to successfully integrate SATA controller drivers for any laptop with chipset Mobile Intel® ICH9M in your Windows XP installation source. While the process might be similar for other laptop chipsets, you should find out which chipset you have and locate the appropriate drivers for the SATA controller.

Steps

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 1

Step 1. Locate and download the driver for the SATA controller

Use a search engine to find a file named "f6flpy3286.zip".

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 2

Step 2. Extract the contents of the file to "% user% \ Desktop \ SATA driver"

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 3

Step 3. Download and install nLite

nLite is a free program that allows you to integrate software and drivers into a Windows installation source. Use a search engine to find nLite v1.4, 9.1 or download the installer from the following location:

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 4

Step 4. Insert your Windows XP CD

Cancel the AutoPlay menu if it is displayed.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 5

Step 5. Launch nLite

Choose English (default) and click on Following.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 6

Step 6. Now you need to locate the location of the installation source

Enter the letter of your CD-ROM drive, usually " E: \ " Where " D: \ (Without quotes) as the path to your Windows installation source. Click on Following.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 7

Step 7. A message will appear saying “Select where to save the installation CD files for modification”

Just click OK.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 8

Step 8. Select the Desktop

Click on Create a new folder and name it "Source XP" (without the quotes). Now click on OK.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 9

Step 9. nLite will now copy your XP installation files to the folder you created

Click on Following when it's finished.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 10

Step 10. You should now be on the Presets page

It should be empty, unless you've used nLite before. Just click on Following.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 11

Step 11. You are now at the Task Selection window

Click on Pilots and Boot ISO, then click Following.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 12

Step 12. Locate your SATA controller driver here

Click on Insert and choose Single pilot.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 13

Step 13. In the File name location, type “% user% \ Desktop \ SATA driver \ iaAHCI.inf” (without quotes)

Click on To open.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 14

Step 14. The Driver Integration Options window is now displayed

Be sure that Textmode driver is selected as the type of Fashion. Select " Intel (R) ICH9M-E / M SATA AHCI Controller »And click on OK, then click Following.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 15

Step 15. A new message appears asking "Do you want to start the process?" "

Click on Yes.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 16

Step 16. nLite will now integrate your drivers into your XP installation folder (% user% \ Desktop \ Source XP)

When finished, click Following, eject your Windows CD, and insert a blank CD-R.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 17

Step 17. You should be at the startup ISO Image window

Select Direct engraving for the type of Fashion and enter a volume name for your CD (ex. XPSP3SATA).

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 18

Step 18. Now just click on Burn

Wait for the CD burning to finish.

Slipstream Your SATA Drivers Into a Windows XP Installation CD Using nLite Step 19

Step 19. Congratulations

You have successfully created a Windows XP installation CD with your SATA controller drivers already integrated. You can now install Windows XP as you normally would.

Advice

Make sure you are signed in and online before you begin

Warnings

  • Although the CD-ROM created in the following steps can work with multiple chipsets, its intended use is for installation on a Mobile Intel® ICH9M chipset. Using the CD with other chipsets may make your computer unable to boot, but most likely it will not allow the installer to see your hard drive.

Popular by topic